Loading... Please wait...

Arduino GPS GY-NEO6MV2

Hover over image to zoom

  • Image 1
14.00 Grams
Ships within 24 hours from Cleveland, Ohio.
Calculated at checkout

 Product Description

The Arduino GPS GY-NEO6MV2 uses a serial interface to communicate with the host microcontroller using a protocol known as NMEA 0183. Using this protocall GPS data is delivered to the Arduino as ASCII strings. The TinyGPS library reads the NMEA data from the Arduino GPS and processes the data to determine it's location. Download the library & code here: https://github.com/mikalhart/TinyGPS/releases/tag/v13

Communication Mode: TTL level, compatible with 3.3V/5V system
Power Supply: DC 2.7-5V
Working Current: 45MA
TXD RXD Impedance: 510R
Default Baud Rate:9600
Catching Time: Warm start: 1s
                            Cold start: 27s
Working Temp.: -40~85℃
Positional Accuracy: 5M
Module size 25 mm x35 mm/0.98''x1.37''(inch) (approx)
The antenna size: 25x 25 mm/0.98''x0.98''
Use XM37-1612 module, MTK Platform, with high-gain active antenna
TTL level, compatible with 3.3V/5V system
The default baud rate: 9600
With rechargable backup battery, can save the ephemeris data when it power down, and make the warm start.
Suitable for RC quadcopter,navigator
Uses(take MCU for example):
VCC: Connect 3.3V/5V
GND: Connect GND
TXD: Connect MCU.RX
RXD: Connect MCU.TX
Package Contents:
1 x GPS Module

 Find Similar Products by Category

Vendors Other Products

You Recently Viewed...


Copyright 2020 Resistor Park. All Rights Reserved.
Sitemap | BigCommerce Design by PSDCenter

Click the button below to add the Arduino GPS GY-NEO6MV2 to your wish list.